What are the technical details of the units?
Correct sizing is essential for optimal performance.
Oversizing an AQUABION unit will reduce overall effectiveness.
-
S15 – 120 mm long, 0.436 kg
Suitable for properties using 1–2 showers at the same time.
-
S20 – 180 mm long, 1.6 kg
Designed for systems where 2–4 showers are frequently in use simultaneously.
Do not install an S20 on a 15 mm mains supply.
Fitting an S20 where an S15 is required will reduce performance rather than improve it.
Commercial unit data sheets and information are available in the commercial section.
How to size an AQUABION?
I have a customer who has a large office with approx 50 people in it, they have a Burco electric water heater that provides there tea & coffee boiling water. Is your product suitable to be installed on the feed to this appliance? If so which size would you recommend and what sort of life span would it have.
We can help but not solve this type of lime scaling. This is because as the treated water moves above 80 ºC some of the good we do is undone. We estimate we are around 50% effective with these type of devices. This means that if the heat scales up every year without Aquabion with Aquabion it will scale up every other year.
We would recommend the D10 or S15 installed 5m away from the water heaters. It would be useful to have a kitchen sink also treated by the Aquabion to ensure the unit is not always in low flow.
Any other questions just ask.
Trade contact form
Installation Instructions
